Effect of skills and work safety on the craftsman productivity In The Sentra Pandai Besi Teratak Rumbio Jaya

Penulis

  • Zakiyul Kamal STIE Bangkinang
  • Librina Tria Putri STIE Bangkinang
  • Mustafa Kamal STIE Bangkinang

DOI:

https://doi.org/10.55768/jrmi.v4i1.94

Kata Kunci:

Skills, Work Safety, Craftsman Productivity

Abstrak

This study aims to determine the effect of skills and work safety on the productivity of craftsmen at Sentra Pandai Besi Teratak Rumbio Jaya. The analysis used in this research is multiple linear analysis. The population in this study were all machete craftsmen who were members of the Rumbio Jaya Teratak Blacksmith Center, amounting to 62 people. While the sample is taken from the entire population as a sample using the census method or total sampling, which is a sampling technique when all members of the population are used as samples (Sugiyono, 2017:67). Hypothesis testing is done by testing simultaneously and partially testing. Based on the results of the study, it can be concluded that simultaneously and partially skills and work safety affect the productivity of craftsmen at Sentra Pandai Besi Teratak Rumbio Jaya. The contribution of the craftsman's productivity variable is 53,9% determined by skills and work safety while the remaining 46,1% is determined by other variables outside of this study.

Referensi

Anwar P, Mangkunegara. (2013). Manajemen Sumber Daya Manusia. Bandung : Remaja Karya Rosada.

Amirullah, Budiyono. (2014). Pemahaman Individu : Observasi, Checklist, Kuisioner, dan Sosiometri. Semarang : Widya Karya.

Ardana, I Komang. Ni Wayan Mujiati & I Wayan Mudiatha Utama. (2012).Manajemen Sumber Daya Manusia. Yogyakarta : Graha Ilmu.

Arman, A. (2019). Pengembangan Kualitas Layanan Jasa Bank PD. BPR Sarimadu Bangkinang. Diklat Review: Jurnal manajemen pendidikan dan pelatihan, 3(2), 77-89.

Hasibuan, Malayu SP. (2013). Manajemen Sumber Daya Manusia. Jakarta : Bumi.

Hasibuan, busro. (2018). Metodologi Penelitian untuk Skripsi dan Tesis Bisnis.Jakarta : PT. Gramedia Pustaka.

Hidayanti, F., Arman, A., & Baharuddin, Y. (2020). EFFECT OF COMPENSATION, WORK FACILITY, SAFETY AND OCCUPATIONAL HEALTH ON THE SATISFACTION OF HARVEST MANDOR (SURVEY IN PT. PERKEBUNAN NUSANTARA V SEI. GALUH, SEI. GARO AND TANDUN). Jurnal Riset Manajemen Indonesia, 2(4), 291-298.

Norawati, S., Kamal, M., Zakaria, N., & Gusman, Y. (2021). ANALISIS DISIPLIN, KOMPETENSI, MOTIVASI KERJA, KOMPENSASI, PELATIHAN DAN DAN PADAKINERJA KARYAWAN (Studi pada PKS PT. Tunggal Yunus Estate Kabupaten Kampar). Menara Ilmu, 15(1), 148-158.

Norawati, S., Yusup, Y., Yunita, A., & Husein, H. (2021). Analisis Lingkungan Kerja Dan Beban Kerja Dan Pengaruhnya Terhadap Kinerja Pegawai Bapenda Kabupaten Kampar. Menara Ilmu, 15(1), 95-106.

Saragih, M. C. I., Hutapea, B., & Samosir, A. PEMBELAJARAN MENULIS PARAGRAF DESKRIPSI BERBASIS OUTDOOR STUDY. PEDAGOGIA, 18(2), 148-161.

Sihombing, C. (2020). UPAYA MENINGKATKAN KEMAMPUAN HASIL BELAJAR SISWA DENGAN METODE DISCUSSION STARTER STORY PADA SISWA KELAS V SD NEGERI 098017 DESA BANGUN TAHUN PELAJARAN 2019/2020. Management of Education: Jurnal Manajemen Pendidikan Islam, 6(2), 162-166.

Sihombing, C. (2020). PENERAPAN MODEL STUDENT TEAMS ACHIEVEMENT DIVISION (STAD) DAN METODE CERAMAH TERHADAP PENINGKATAN PRESTASI BELAJAR IPS PADA SISWA KELAS V SD NEGERI PEMATANG RAYA. Management of Education: Jurnal Manajemen Pendidikan Islam, 6(1), 75-80.

Sihombing, C., Cui, Z., Karo, R. K., Nanda, F. A., & Samosir, J. (2020, December). WHATSAPP-BASED E-LEARNING IMPLEMENTATION ON VALUES LEARNING PANCASILA IN CLASS V SD NEGERI 122351 INTRODUCTION. In International Conference on Health Science, Green Economics, Educational Review and Technology (Vol. 2, pp. 317-332).Sugiyono. (2011). Metode Penelitian Kuantitatif Kualitatif dan R&D. Bandung : Alfabeta.

Sugiyono. (2016). Metode Penelitian Pendidikan Pendekatan Kuantitatif, Kualitatif, dan R&D. Bandung : Alfabeta.

Sugiyono. (2017). Metode Penelitian Pendidikan. Bandung : Alfabeta.

Sumanto, E., Baharuddin, Y., & Basem, Z. (2021). THE EFFECT OF SKILL AND KNOWLEDGE ON THE PERFORMANCE EMPLOYEE AT THE PT. VIRAJAYA PUTRA TAMBANG. Jurnal Riset Manajemen Indonesia, 3(1), 19-28.

Suma’mur. (2013). Hiegiene Perusahaan dan Keselamatan Kerja. Jakarta : CV. Sagung Seto.

Tambunan, J. O. (2020). PENGARUH MODEL PEMBELAJARAN KOOPERATIF TIPE JIGSAW TERHADAP HASIL BELAJAR SISWA KELAS V DI SD NEGERI 096117 BARINGIN RAYA TAHUN PELAJARAN 2019/2020. Management of Education: Jurnal Manajemen Pendidikan Islam, 6(1), 89-92.

Tambunan, J. O. (2020). PENERAPAN METODE ELABORASI UNTUK MENINGKATKAN HASIL BELAJAR IPA POKOK BAHASAN SIFAT-SIFAT CAHAYA SISWA KELAS V NEGERI 091352 HUTA RAJA TAHUN AJARAN 2019/2020. Management of Education: Jurnal Manajemen Pendidikan Islam, 6(2), 172-176.Zulher, Z. (2020). Analisis Etos Kerja, Lingkungan Kerja dan Beban Kerja Terhadap Kepuasan Kerja Pegawai (Survey pada Pegawai UPTD Puskesmas Bangkinang Kota). Jurnal Menara Ekonomi: Penelitian dan Kajian Ilmiah Bidang Ekonomi, 6(2).

Unduhan

Diterbitkan

2022-01-31

Cara Mengutip

Kamal, Z., Putri, L. T., & Kamal, M. (2022). Effect of skills and work safety on the craftsman productivity In The Sentra Pandai Besi Teratak Rumbio Jaya. Jurnal Riset Manajemen Indonesia, 4(1), 72–79. https://doi.org/10.55768/jrmi.v4i1.94

Artikel paling banyak dibaca berdasarkan penulis yang sama

1 2 > >>